5/8" Panel Raisers, Back cu

Freeborn Panel raisers are made with a 15 degree shear cut angle.

Counter clockwise rotation with the wood face up.

Custom made reverse rotation Panel raisers are available.

Panel cutters cut a 1-3/8" reveal, plus a 3/8" long tongue.

When working with 3/4" stock and using the full depth of the cutter, a 5/8" panel raiser will leave the face of the panel flush with the door frame and a back cut of 1/8" will be required to end up with a 1/4" tongue. Working with a 3/4" panel raiser at the full depth, the face of the panel will be proud of the door frame 1/8" and no back cut  will be required.

Mini Pro Cutters

	3 wing
	4-1/2" diameter
	3/4" bore
	runs with a 1-5/8" diam. rub bearing (AM-90-026) Pro Line Cutters  3 wing 6" diameter 1-1/4" bore runs with a 3" diam. rub bearing (AP-90-048)